32 The Ideal Gas Law and Some Applications

[latexpage]

Learning Objectives

  1. Learn the ideal gas law.
  2. Apply the ideal gas law to any set of conditions of a gas.
  3. Apply the ideal gas law to molar volumes, density, and stoichiometry problems.

So far, the gas laws we have considered have all required that the gas change its conditions; then we predict a resulting change in one of its properties. Are there any gas laws that relate the physical properties of a gas at any given time?

Consider a further extension of the combined gas law to include n. By analogy to Avogadro’s law, n is positioned in the denominator of the fraction, opposite the volume. So:

[latex]\dfrac{PV}{nT}=\text{constant}[/latex]

Because pressure, volume, temperature, and amount are the only four independent physical properties of a gas, the constant in the above equation is truly a constant; indeed, because we do not need to specify the identity of a gas to apply the gas laws, this constant is the same for all gases. We define this constant with the symbol R, so the previous equation is written as:

[latex]\dfrac{PV}{nT}=R[/latex]

which is usually rearranged as:

[latex]PV=nRT[/latex]

This equation is called the ideal gas law. It relates the four independent properties of a gas at any time. The constant R is called the ideal gas law constant. Its value depends on the units used to express pressure and volume. Table 6.1 “Values of the Ideal Gas Law Constant R” lists the numerical values of R.

Table 6.1 Values of the Ideal Gas Law Constant R
Numerical Value Units
0.08205 [latex]\dfrac{\text{L}\cdot \text{atm}}{\text{mol}\cdot \text{K}}[/latex]
62.36 [latex]\dfrac{\text{L}\cdot \text{torr}}{\text{mol}\cdot \text{K}}=\dfrac{\text{L}\cdot\text{mmHg}}{\text{mol}\cdot \text{K}}[/latex]
8.314 [latex]\dfrac{\text{J}}{\text{mol}\cdot \text{K}}[/latex]

The ideal gas law is used like any other gas law, with attention paid to the units and making sure that temperature is expressed in kelvins. However, the ideal gas law does not require a change in the conditions of a gas sample. The ideal gas law implies that if you know any three of the physical properties of a gas, you can calculate the fourth property.

Example 6.9

Problem

A 4.22 mol sample of Ar has a pressure of 1.21 atm and a temperature of 34°C. What is its volume?

Solution

The first step is to convert temperature to kelvins:

34 + 273 = 307 K

Now we can substitute the conditions into the ideal gas law:

[latex](1.21\text{ atm})(V)=(4.22\text{ mol})\left(0.08205\cdot \dfrac{\text{L}\cdot\text{atm}}{\text{mol}\cdot \text{K}}\right)(307 \text{ K})[/latex]

The atm unit is in the numerator of both sides, so it cancels. On the right side of the equation, the mol and K units appear in the numerator and the denominator, so they cancel as well. The only unit remaining is L, which is the unit of volume we are looking for. We isolate the volume variable by dividing both sides of the equation by 1.21:

[latex]V=\dfrac{(4.22)(0.08205)(307)}{1.21}\text{ L}[/latex]

Then solving for volume, we get:

V = 87.9 L

Test Yourself

A 0.0997 mol sample of O2 has a pressure of 0.692 atm and a temperature of 333 K. What is its volume?

Answer

3.94 L

Example 6.10

Problem

At a given temperature, 0.00332 g of Hg in the gas phase has a pressure of 0.00120 mmHg and a volume of 435 L. What is its temperature?

Solution

We are not given the number of moles of Hg directly, but we are given a mass. We can use the molar mass of Hg to convert to the number of moles.

[latex]0.00332\text{ \cancel{g Hg}}\times \dfrac{1\text{ mol Hg}}{200.59\text{ \cancel{g Hg}}}=0.0000165\text{ mol}=1.65\times 10^{-5}\text{ mol}[/latex]

Pressure is given in units of millimetres of mercury. We can either convert this to atmospheres or use the value of the ideal gas constant that includes the mmHg unit. We will take the second option. Substituting into the ideal gas law:

[latex](0.00120\text{ mmHg})(435\text{ L})=(1.65\times 10^{-5}\text{ mol})\left(62.36\cdot \dfrac{\text{L}\cdot \text{mmHg}}{\text{mol}\cdot\text{K}}\right)T[/latex]

The mmHg, L, and mol units cancel, leaving the K unit, the unit of temperature. Isolating T all by itself on one side, we get:

[latex]T=\dfrac{(0.00120)(435)}{(1.65\times 10^{-5})(62.36)}\text{ K}[/latex]

Then solving for K, we get:

T = 507 K

Test Yourself

For a 0.00554 mol sample of H2, P = 23.44 torr and T = 557 K. What is its volume?

Answer

8.21 L

The ideal gas law can also be used in stoichiometry problems.

Example 6.11

Problem

What volume of H2 is produced at 299 K and 1.07 atm when 55.8 g of Zn metal react with excess HCl?

Zn(s) + 2HCl(aq) → ZnCl2(aq) + H2(g)

Solution

Here we have a stoichiometry problem where we need to find the number of moles of H2 produced. Then we can use the ideal gas law, with the given temperature and pressure, to determine the volume of gas produced. First, the number of moles of H2 is calculated:

[latex]55.8\text{ \cancel{g Zn}}\times \dfrac{1\text{ \cancel{mol Zn}}}{65.41\text{ \cancel{g Zn}}}\times \dfrac{1\text{ mol }\ce{H2}}{1\text{ \cancel{mol Zn}}}=0.853\text{ mol }\ce{H2}[/latex]

Now that we know the number of moles of gas, we can use the ideal gas law to determine the volume, given the other conditions:

[latex](1.07\text{ atm})V=(0.853\text{ mol})\left(0.08205\cdot \dfrac{\text{L}\cdot\text{atm}}{\text{mol}\cdot\text{K}}\right)(299\text{ K})[/latex]

All the units cancel except for L, for volume, which means:

V = 19.6 L

Test Yourself

What pressure of HCl is generated if 3.44 g of Cl2 are reacted in 4.55 L at 455 K?

H2(g) + Cl2(g) → 2HCl(g)

Answer

0.796 atm

It should be obvious by now that some physical properties of gases depend strongly on the conditions. What we need is a set of standard conditions so that properties of gases can be properly compared to each other. Standard temperature and pressure (STP) is defined as exactly 100 kPa of pressure (0.986 atm) and 273 K (0°C). For simplicity, we will use 1 atm as standard pressure. Defining STP allows us to compare more directly the properties of gases that differ from each other.

One property shared among gases is a molar volume. The molar volume is the volume of 1 mol of a gas. At STP, the molar volume of a gas can be easily determined by using the ideal gas law:

[latex](1\text{ atm})V=(1\text{ mol})\left(0.08205\cdot \dfrac{\text{L}\cdot\text{atm}}{\text{mol}\cdot\text{K}}\right)(273\text{ K})[/latex]

All the units cancel except for L, the unit of volume. So:

V = 22.4 L

Note that we have not specified the identity of the gas; we have specified only that the pressure is 1 atm and the temperature is 273 K. This makes for a very useful approximation: any gas at STP has a volume of 22.4 L per mole of gas; that is, the molar volume at STP is 22.4 L/mol (Figure 6.3 “Molar Volume”). This molar volume makes a useful conversion factor in stoichiometry problems if the conditions are at STP. If the conditions are not at STP, a molar volume of 22.4 L/mol is not applicable. However, if the conditions are not at STP, the combined gas law can be used to calculate the volume of the gas at STP; then the 22.4 L/mol molar volume can be used.

A cube with a side length of 28.2 cm.
Figure 6.3 “Molar Volume.” A mole of gas at STP occupies 22.4 L, the volume of a cube that is 28.2 cm on a side.

Example 6.12

Problem

How many moles of Ar are present in 38.7 L at STP?

Solution

We can use the molar volume, 22.4 L/mol, as a conversion factor, but we need to reverse the fraction so that the L units cancel and mol units are introduced. It is a one-step conversion:

[latex]38.7\text{ \cancel{L}}\times \dfrac{1\text{ mol}}{22.4\text{ \cancel{L}}}=1.73\text{ mol}[/latex]

Test Yourself

What volume does 4.87 mol of Kr have at STP?

Answer

109 L

Example 6.13

Problem

What volume of H2 is produced at STP when 55.8 g of Zn metal react with excess HCl?

Zn(s) + 2HCl(aq) → ZnCl2(aq) + H2(g)

Solution

This is a stoichiometry problem with a twist: we need to use the molar volume of a gas at STP to determine the final answer. The first part of the calculation is the same as in a previous example:

[latex]55.8\text{ \cancel{g Zn}}\times\dfrac{1\text{ \cancel{mol Zn}}}{65.41\text{ \cancel{g Zn}}}\times \dfrac{1\text{ mol }\ce{H2}}{1\text{ \cancel{mol Zn}}}=0.853\text{ mol }\ce{H2}[/latex]

Now we can use the molar volume, 22.4 L/mol, because the gas is at STP:

[latex]0.853\cancel{\text{ mol }\ce{H2}}\times \dfrac{22.4\text{ L}}{1\cancel{\text{ mol }\ce{H2}}}=19.1\text{ L }\ce{H2}[/latex]

Alternatively, we could have applied the molar volume as a third conversion factor in the original stoichiometry calculation.

Test Yourself

What volume of HCl is generated if 3.44 g of Cl2 are reacted at STP?

H2(g) + Cl2(g) → 2HCl(g)

Answer

2.17 L

The ideal gas law can also be used to determine the densities of gases. Recall that density is defined as the mass of a substance divided by its volume:

[latex]d=\dfrac{m}{V}[/latex]

Assume that you have exactly 1 mol of a gas. If you know the identity of the gas, you can determine the molar mass of the substance. Using the ideal gas law, you can also determine the volume of that mole of gas, using whatever the temperature and pressure conditions are. Then you can calculate the density of the gas by using:

[latex]\text{density}=\dfrac{\text{molar mass}}{\text{molar volume}}[/latex]

Example 6.14

Problem

What is the density of N2 at 25°C and 0.955 atm?

Solution

First, we must convert the temperature into kelvins:

25 + 273 = 298 K

If we assume exactly 1 mol of N2, then we know its mass: 28.0 g. Using the ideal gas law, we can calculate the volume:

[latex](0.955\text{ atm})V=(1\text{ mol})\left(0.08205\cdot \dfrac{\text{L}\cdot\text{atm}}{\text{mol}\cdot\text{K}}\right)(298\text{ K})[/latex]

All the units cancel except for L, the unit of volume. So:

V = 25.6 L

Knowing the molar mass and the molar volume, we can determine the density of N2 under these conditions:

[latex]d=\dfrac{28.0\text{ g}}{25.6\text{ L}}=1.09\text{ g/L}[/latex]

Test Yourself

What is the density of CO2 at a pressure of 0.0079 atm and 227 K? (These are the approximate atmospheric conditions on Mars.)

Answer

0.019 g/L

Chemistry Is Everywhere: Breathing

Breathing (more properly called respiration) is the process by which we draw air into our lungs so that our bodies can take up oxygen from the air. Let us apply the gas laws to breathing.

Start by considering pressure. We draw air into our lungs because the diaphragm, a muscle underneath the lungs, moves down to reduce pressure in the lungs, causing external air to rush in to fill the lower-pressure volume. We expel air by the diaphragm pushing against the lungs, increasing pressure inside the lungs and forcing the high-pressure air out. What are the pressure changes involved? A quarter of an atmosphere? A tenth of an atmosphere? Actually, under normal conditions, a pressure difference of only 1 or 2 torr makes us breathe in and out.

Breathing requires a pressure difference of 1 to 3 torr.
Figure 6.4 “Breathing Mechanics.” Breathing involves pressure differences between the inside of the lungs and the air outside. The pressure differences are only a few torr.

A normal breath is about 0.50 L. If room temperature is about 22°C, then the air has a temperature of about 295 K. With normal pressure being 1.0 atm, how many moles of air do we take in for every breath? The ideal gas law gives us an answer:

[latex](1.0\text{ atm})(0.50\text{ L})=n\left(0.08205\cdot \dfrac{\text{L}\cdot\text{atm}}{\text{mol}\cdot \text{K}}\right)(295\text{ K})[/latex]

Solving for the number of moles, we get:

n = 0.021 mol air

This ends up being about 0.6 g of air per breath—not much, but enough to keep us alive.

Key Takeaways

  • The ideal gas law relates the four independent physical properties of a gas at any time.
  • The ideal gas law can be used in stoichiometry problems in which chemical reactions involve gases.
  • Standard temperature and pressure (STP) are a useful set of benchmark conditions to compare other properties of gases.
  • At STP, gases have a volume of 22.4 L per mole.
  • The ideal gas law can be used to determine densities of gases.

Exercises

Questions

  1. What is the ideal gas law? What is the significance of R?
  2. Why does R have different numerical values (see Table 6.1 “Values of the Ideal Gas Law Constant R”)?
  3. A sample of gas has a volume of 3.91 L, a temperature of 305 K, and a pressure of 2.09 atm. How many moles of gas are present?
  4. A 3.88 mol sample of gas has a temperature of 28°C and a pressure of 885 torr. What is its volume?
  5. A 0.0555 mol sample of Kr has a temperature of 188°C and a volume of 0.577 L. What pressure does it have?
  6. If 1.000 mol of gas has a volume of 5.00 L and a pressure of 5.00 atm, what is its temperature?
  7. A sample of 7.55 g of He has a volume of 5,520 mL and a temperature of 123°C. What is its pressure in torr?
  8. A sample of 87.4 g of Cl2 has a temperature of −22°C and a pressure of 993 torr. What is its volume in millilitres?
  9. A sample of Ne has a pressure of 0.772 atm and a volume of 18.95 L. If its temperature is 295 K, what mass is present in the sample?
  10. A mercury lamp contains 0.0055 g of Hg vapour in a volume of 15.0 mL. If the operating temperature is 2,800 K, what is the pressure of the mercury vapour?
  11. Oxygen is a product of the decomposition of mercury(II) oxide:

    2HgO(s) → 2Hg(ℓ) + O2(g)

    What volume of O2 is formed from the decomposition of 3.009 g of HgO if the gas has a pressure of 744 torr and a temperature of 122°C?

  12. Lithium oxide is used to absorb carbon dioxide:

    Li2O(s) + CO2(g) → Li2CO3(s)

    What volume of CO2 can 6.77 g of Li2O absorb if the CO2 pressure is 3.5 × 10−4 atm and the temperature is 295 K?

  13. What is the volume of 17.88 mol of Ar at STP?
  14. How many moles are present in 334 L of H2 at STP?
  15. How many litres of CO2 at STP are produced from 100.0 g of C8H18, the approximate formula of gasoline?

    2C8H18(ℓ) + 25O2(g) → 16CO2(g) + 18H2O(ℓ)

  16. How many litres of O2 at STP are required to burn 3.77 g of butane from a disposable lighter?

    2C4H10(g) + 13O2(g) → 8CO2(g) + 10H2O(ℓ)

  17. What is the density of each gas at STP?
    1. He
    2. Ne
    3. Ar
    4. K
  18.  What is the density of each gas at STP?
    1. H2
    2. N2
    3. O2
  19. What is the density of SF6 at 335 K and 788 torr?
  20. What is the density of He at −200°C and 33.9 torr?

Answers

  1. The ideal gas law is PV = nRT. R is the ideal gas law constant, which relates the other four variables.
  1. 0.327 mol
  1. 3.64 atm
  1. 8,440 torr
  1. 12.2 g
  1. 0.230 L
  1. 401 L
  1. 157 L
    1. 0.179 g/L
    2. 0.901 g/L
    3. 1.78 g/L
    4. 3.74 g/L
  1. 5.51 g/L

Media Attributions

definition

License

Icon for the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License

Introductory Chemistry Ball Copyright © 2014 by Jessie A. Key is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License, except where otherwise noted.

Share This Book