10 Sheet Roller Assignment
(“Armillary sphere and greenhouse at the Queen Elizabeth Garden, Dumfries House” by Rosser1954 is licensed under CC BY-SA 4.0.)
Purpose
- Use a roller to create curved sheet metal
Task
In this assignment, you and your partner will be using the roller in E164 to create one garden ring.
The object is to make 4 rings that fit inside each other for the purpose of garden art. You may weld or rivet rings together in place.
- Find usable material for this assignment BEFORE you start this assignment. The plate must not be longer than 8′ long or 4″ wide, or thicker than 14g, but can be less than.
- Use the roller to create concentric circles that fit within each other
- Rivet or weld all rings together at multiple axes.
Criteria of Success
- The four rings must fit inside each other.
