17.10 Chapter Conclusion

David Colameco, M.Ed.

Summary

As a welding student everything that you are taught and welding is influenced heavily by welding codes. From the A36 steel that you weld on at school, to the welding electrodes such as E-6010 or E-7018, to the joints such as T-joints and Butt joints, are all included in codes as acceptable materials, electrodes, and joints for common fabrications.

This chapter gave a broad overview of welding codes and standards that exist for many of the common industries you may encounter. If any of the industries or fabrications interest you, you are highly encouraged to find more information and contact welders for advice that is specific to your career goals.

Review Questions

  1. Where are codes and standards used in welding?
    1. Base materials.
    2. Filler materials.
    3. In-service environment (i.e. pressures, structures).
    4. Codes and standards are never used in welding.
  2. Where is the WABO code 27.13 applied?
    1. Aluminum Bridges in Washington State.
    2. Structural Steel buildings in Washington State.
    3. Stoves fabricated in Washington State.
    4. Vehicles fabricated in Washington State.
  3. Where are AWS codes usually applied?
    1. Structural fabrications using Steel, Aluminum, or Stainless Steel.
    2. Hull construction for maritime vessels.
    3. Pressure vessels.
    4. Oil pipelines.
  4. Where are ASME codes usually applied?
    1. Structural fabrications using Steel, Aluminum, or Stainless Steel.
    2. Hull construction for maritime vessels.
    3. Pressure vessels.
    4. Oil pipelines.
  5. Where are API standards usually applied?
    1. Structural fabrications using Steel, Aluminum, or Stainless Steel.
    2. Hull construction for maritime vessels.
    3. Pressure vessels.
    4. Oil pipelines.
  6. Where are ABS standards usually applied?
    1. Structural fabrications using Steel, Aluminum, or Stainless Steel.
    2. Hull construction for maritime vessels.
    3. Pressure vessels.
    4. Oil pipelines.
  7. What does CJP stand for?
    1. Concentrated joint penetration.
    2. Complete joint penetration.
    3. Completed just paint.
    4. Closed joint preparation.
  8. Where might welding codes not be used? Select all that apply.
    1. Fabrication shops that are not required by contract or law.
    2. Large projects where safety is a concern.
    3. Hobbyists.
    4. Welding codes are always used everywhere.
  9. Which welding codes and standards might be used for a cruise ship or ferry? Select all that apply.
    1. American Petroleum Institute.
    2. American Welding Society (Structural).
    3. American Bureau of Shipping.
    4. American Society of Mechanical Engineers (Pressure Vessels and Piping).
  10. What color is used on AWS documents for Industrial Applications?
    1. Brown.
    2. Green.
    3. Blue.
    4. Red.
  11. Which organization has developed a welding code for bridge fabrication?
    1. American Petroleum Institute.
    2. American Welding Society.
    3. American Bureau of Shipping.
    4. American Society of Mechanical Engineers.
  12. When a welder takes a welder qualification test how is the weldment examined? Select all that apply.
    1. Weldments are not examined.
    2. Visually (NDE).
    3. Buoyancy test (Density check).
    4. Bend Tests.
  13. A test position labeled 2F is what type of weld?
    1. Plug welds.
    2. Groove welds.
    3. Stud welding.
    4. Fillet welds.
  14. A test position labeled 4G is what type of weld?
    1. Plug welds.
    2. Groove welds.
    3. Stud welding.
    4. Fillet welds.
  15. Which welding codes and standards are most likely used for a pressure vessel?
    1. American Petroleum Institute.
    2. American Welding Society.
    3. American Bureau of Shipping.
    4. American Society of Mechanical Engineers.
  16. Which organization focuses on steel construction?
    1. American Petroleum Institute.
    2. American Welding Society.
    3. American Institute of Steel Construction.
    4. American Society of Mechanical Engineers.
  17. What welding fabrications does NAVSEA cover?
    1. Bridges.
    2. United States Naval Ships and Submarines
    3. Structural buildings.
    4. Refineries.
  18. Certification to more than one welding code or standard is?
    1. Not possible, a welder must give up one certification before getting another.
    2. Recommended to open new doors in your welding career.
    3. Not worth the time and effort.
    4. Not necessary.
  19. Welding Procedure Specifications are?
    1. An optional piece of paper to keep track of.
    2. Only used in welding schools.
    3. A document that lists all of the required information needed to weld.
    4. A document to fill out while welding to track machine settings.
  20. If I am interested in an industry discussed in this chapter I should? Select all that apply.
    1. Talk to your welding instructor.
    2. Perform an internet search of opportunities.
    3. Absolutely nothing. Dreams are just that, dreams.
    4. Make an appointment with your career placement office.

License

Icon for the Creative Commons Attribution 4.0 International License

Introduction to Welding Copyright © by David Colameco, M.Ed. is licensed under a Creative Commons Attribution 4.0 International License, except where otherwise noted.